|
CCTV Systems > Analogue CCTV Devices >
Watec Color Cameras
WAT-230CDB DOMED COLOR CAMERA
Specifications :
| Model |
WAT-230CDB (NTSC/PAL) |
| Pick-up element |
1/4inch interline transfer CCD image sensor |
| Number of total pixels |
811(H)×507(V) (NTSC), 795(H)×595(V) (PAL) |
| Number of effective pixels |
768(H)×494(V) (NTSC), 752(H)×582(V) (PAL) |
| Unit cell size |
4.9μm(H)×5.6μm(V) (NTSC), 5.0μm(H)×4.7μm(V)(PAL) |
| Scanning system |
2:1 interlace |
| Synchronizing system |
Internal |
| Video output |
Composite Video, １
Vp-p, 75ohm Unbalanced |
| Resolution
(Horizontal) |
450TV lines (Center) |
| Minimum illumination |
1.6 lx. F2.0 (G3.8mm lens) |
| Gamma correction |
g
@ 0.45 |
| AGC |
6～ 30dB |
| S/N Ratio |
50dB (AGC OFF, g
@ 0.45) |
| Back light compensation |
ON |
| White balance |
Automatic |
| Electronic Iris |
1/60 ~
1/100,000sec. (NTSC), 1/50 ~ 1/100,000sec. (PAL) |
| Standard Lens |
Glass, f3.8mm,
F2.0 |
| Connection terminal |
Video out, Power,
GND |
| Power supply |
DC +5.4～7.5V |
| Power consumption |
0.96 W |
| Operating temperature |
-10°C ～
+40°C (w/o condensation) |
| Storage temperature |
-30°C ～
+70°C (w/o condensation) |
| Dimensions |
φ 78.0×64.0(H)mm |
| Weight |
120g |
| Accessories |
Screw(M3.1×16)×3, Screw(M2.4×10)×3 |
|
|
