| Model |
WAT-240 VIVID (NTSC/PAL) |
| Pick-up element |
1/4 inch interline transfer CCD image sensor |
| Number of total pixels |
811(H)×507(V) (NTSC); 795(H)×595(V) (PAL) |
| Number of effective pixels |
768(H)×494(V) (NTSC); 752(H)×582(V) (PAL) |
| Unit cell size |
4.9 μ m(H) × 5.6
μ m(V) (NTSC), 5.0 μm(H) × 4.7 μ m(V) (PAL) |
| Scanning system |
2:1 interlace |
| Synchronizing system |
Internal |
| Video output |
Composite Video,
1.0 Vp-p, 75ohm Unbalanced |
| Resolution
(Horizontal) |
450TV lines (center) |
| Minimum illumination |
1.6 lx. (F2.0) |
| Gamma correction |
g
@ 0.45 |
| AGC |
6 - 30dB |
| S/N Ratio |
More than 50dB(AGC
OFF, g =1.0) |
| White balance |
Automatic |
| Back light compensation |
ON |
| Electronic Iris |
1/60 -
1/100000sec. (EIA), 1/50 - 1/100000sec. (CCIR) |
| Standard Lens |
(Glass, f3.8mm,
F2.0) or (Pin Hole, f3.7mm, F4.5) |
| Power supply |
DC +6V (DC+5.0 -
+7.6V) |
| Current |
1.08W (typ)
(=180mA) |
| Operating temperature |
-10°C ～ +40°C
(w/o condensation) |
| Storage temperature |
-30°C ～
+70°C (w/o condensation) |
| Dimensions |
18(Ø) x 47.6(L)mm
+ Lens |
| Weight |
28g (with Glass
f3.8mm lens) |
| Accessories |
Holder Ring Set |
