| Model |
WAT-200D (NTSC, PAL) |
| Pick-up element |
1/3inch Interline transfer CCD image sensor |
| Number of total pixels |
811(H)×508(V) (NTSC); 795(H)×596(V) (PAL) |
| Number of effective pixels |
768(H)×494(V) (NTSC); 752(H)×582(V) (PAL) |
| Unit cell size |
6.35μ m(H)×7.4μ
m(V)(NTSC); 6.5μ m(H)×6.25μ m(V)(PAL) |
| Scanning system |
2:1 interlace |
| Synchronizing system |
Internal |
| Video output |
Composite Video, １
Vp-p, 75ohm Unbalanced |
| Resolution(Horizontal) |
470TV lines (center) |
| Minimum illumination |
1.0 lx. F1.2 |
| Gamma correction |
g
@ 0.45 |
| AGC |
8～ 36dB |
| S/N Ratio |
50dB(AGC OFF) |
| Back light compensation |
ON |
| White balance |
Auto trace |
| Standard lens |
Varifocal Auto-iris Zoom lens, f4～9mm, F1.6 |
| Angular view |
35°～ 70°(H) |
| Use environment |
IEC60529 IP-46 |
| Installation screw |
U 1/4inch (D=5mm) (Top/Bottom/Both side) |
| Connection terminal |
|
| (WAT-200RX) |
Video out(BNC), Camera in(BNC), Power |
| Power supply |
DC +15.0～ 16.5V (15V+10%) |
| Current |
max. 300mA(3C2V at 100m in length) |
| Operating temperature |
-10°C ～
+40°C |
| Storage temperature |
-30°C ～
+70°C |
| Dimensions |
49.0(φ ) × 98.0(L) mm |
| Weight |
Approx. 300g |
| Accessories |
Receiver (WAT-200RX), Power supplies
(AD-156), Holder |
