| Model |
WAT-660D (EIA,
CCIR) |
| Pick-up element |
1/4 inch Interline transfer CCD image sensor |
| Number of total pixels |
537(H)×505(V) (EIA);
537(H)×597(V) (CCIR) |
| Number of effective pixels |
510(H)×492(V) (EIA);
500(H)×582(V) (CCIR) |
| Unit cell size |
7.15 μm(H) ×
5.55 μm(V) (EIA); 7.3 μm(H) × 4.7 μm(V)
(CCIR) |
| Scanning system |
2:1 interlace |
| Synchronizing system |
Internal |
| Video output |
Composite Video, １
Vp-p, 75ohm Unbalanced |
| Resolution
(Horizontal) |
380TV lines (Glass
f3.8mm lens, center) |
| Minimum illumination |
0.08 lx. F2.0
(Glass f3.8mm lens) |
| Gamma correction |
g
@ 0.45 |
| AGC |
5～ 32dB |
| S/N Ratio |
46dB (AGC
OFF) |
| Standard
Lens |
(Glass, f3.8mm,
F2.0) or (Pin Hole, f3.7mm, F4.5) |
| Installation screw |
M2 (D=2.5mm) (Both
side) |
| Connection terminal |
Special connector |
| Power supply |
DC +9.0～9.9V |
| Current |
max. 110mA |
| Operating temperature |
-10°C ～
+40°C |
| Storage temperature |
-30°C ～
+70°C |
| Dimensions |
36.0(W) x 30.0(H)
x 16.0(D) mm + lens |
| Weight |
Approx. 30g |
| Accessories |
Connector
(K-59) |
