| Model |
WAT-902DM2 (EIA/CCIR) |
| Pick-up element |
1/2 inch Interline transfer CCD image sensor |
| Number of total pixels |
811(H)×508(V) (EIA);
795(H)×596(V) (CCIR) |
| Number of effective pixels |
768(H)×494(V) (EIA);
752(H)×582(V) (CCIR) |
| Unit cell size |
6.35 μm(H) ×
7.4 μm(V) (EIA); 6.5 μm(H) × 6.25 μm(V)
(CCIR) |
| Scanning system |
2:1 interlace |
| Synchronizing system |
Internal |
| Video output |
Composite Video, １
Vp-p, 75ohm Unbalanced |
| Resolution
(Horizontal) |
570TV lines
(Center) |
| Minimum illumination |
0.0018 lx. F1.4 (AGC
HI) |
| Gamma correction |
g
@ 0.45, g
@ 1.0 (Switchable with
internal switch) |
| AGC |
HI : 8～
40dB, LO : 8 ~ 22dB |
| S/N Ratio |
52dB (AGC
OFF = 8dB, g
= 1.0) |
| AE
Mode |
OFF : 1/60 (EIA),
1/50 (CCIR), FL : 1/100(EIA), 1/120 (CCIR)
EI : 1/60 ~ 1/100000sec. (EIA), 1/50 ~
1/100000sec. (CCIR) |
| Back light
compensation |
ON/OFF Selectable |
| Lens mount |
CS-mount |
| Installation screw |
U 1/4 inch (D=5mm)
(Top/Bottom) |
| Connection terminal |
Video out(BNC),
Power, Auto iris (Video/DC auto, selection) |
| Power supply |
DC +9.0～15.0V |
| Current |
max. 120mA |
| Operating temperature |
-10°C ～
+40°C (w/o condensation) |
| Storage temperature |
-30°C ～
+70°C (w/o condensation) |
| Dimensions |
35.5(W) x 36.0(H)
x 64.0(L) mm |
| Weight |
Approx. 90g |
| Accessories |
DC-Plug(WPDC12),
Iris-plug(AIC-G), Hex wrench |
