CCTV Systems > Analogue CCTV Devices > Watec Monochrome Cameras

WAT -  902H 2 / 3 ULTIMATE

Specifications :

Model	WAT-902H2 ULTIMATE (CCIR)	WAT-902H2 ULTIMATE (EIA)
Pick-up element	1/2 inch Interline transfer CCD image sensor
Number of total pixels	811(H)×508(V)	795(H)×596(V)
Number of effective pixels	768(H)×494(V)	752(H)×582(V)
Unit cell size	8.4 μm(H) × 9.8 μm(V)	8.6 μm(H) × 8.3 μm(V)
Shutter speeds	EI1: 1/60 sec. - 1/100000 sec. EI2: 1/100 sec. - 1/100000 sec. FL: 1/100 sec. OFF: 1/60 sec.	EI1: 1/50 sec. - 1/100000 sec. EI2: 1/120 sec. - 1/100000 sec. FL: 1/120 sec. FL: 1/50 sec.
	1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/100000 sec.
Minimum illumination	0.0001 lx. F1.4
Model	WAT-902H3 ULTIMATE (EIA)	WAT-902H3 ULTIMATE (CCIR)
Pick-up element	1/3 inch Interline transfer CCD image sensor
Number of total pixels	811(H)×508(V)	795(H)×596(V)
Number of effective pixels	768(H)×494(V)	752(H)×582(V)
Unit cell size	6.35 μm(H) × 7.40 μm(V)	6.50 μm(H) × 6.25 μm(V)
Shutter speeds	EI1: 1/60 sec. - 1/100000 sec. EI2: 1/100 sec. - 1/100000 sec. FL: 1/100 sec. OFF: 1/60 sec.	EI1: 1/50 sec. - 1/100000 sec. EI2: 1/120 sec. - 1/100000 sec. FL: 1/120 sec. FL: 1/50 sec.
	1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/100000 sec.
Minimum illumination	0.0001 lx. F1.4
	Common specifications
Synchronizing system	Internal sync.
Video output	1Vp-p, 75ohms, unbalanced
Resolution (H)	570TVL (Center)
SN ratio	More than 50dB (AGC OFF)
AGC	HI: 5-60dB LO: 5-32dB MGC(5-60dB)
Back light compensation	OFF(Default) Center Lower Center + lower
Gamma correction	HI (γ @ 0.35) LO (γ @ 0.45) OFF (γ @ 1)
Power supply	DC12V ± 10%
Power consumption	1.32W (110mA)
Operating temperature	-10°C ~ +40°C
Storage temperature	-30°C ~ +70°C
Dimensions (W×H×L)	35.5 × 40 × 63 (mm)
Weight	approx. 98g