| Model |
WAT-902H (EIA,
CCIR) |
| Pick-up element |
1/2 inch Interline transfer CCD image sensor |
| Number of total pixels |
811(H)×508(V) : (EIA);
795(H)×596(V) : (CCIR) |
| Number of effective pixels |
768(H)×494(V) : (EIA);
752(H)×582(V) : (CCIR) |
| Unit cell size |
8.4 μm(H) ×
9.8 μm(V) : (EIA); 8.6 μm(H) × 8.3 μm(V)
: (CCIR) |
| Scanning system |
2 : 1 interlace |
| Synchronizing system |
Internal |
| Video output |
Composite Video, １
Vp-p, 75ohm Unbalanced |
| Resolution
(Horizontal) |
570TV lines
(center) |
| Minimum illumination |
0.002 lx. F1.4
(AGC Low)
0.0003 lx. F1.4 (AGC High) |
| Gamma correction |
g
@ 0.45 |
| AGC |
Hi : 5～50dB,
Lo : 5~32dB |
| S/N Ratio |
46dB ( AGC OFF) |
| AE
mode |
ON (Electronic
iris) : 1/60~1/100000sec. (EIA)
1/50~1/100000sec. (CCIR)
OFF : 1/60(EIA), 1/50 (CCIR) |
| Back light
compensattion |
ON |
| Lens mount |
CS-mount |
| Installation screw |
U 1/4inch (D=5mm)
(Top/Bottom) |
| Connection
terminal |
Video out (RCA) ,
Power, Auto iris |
| Power supply |
DC +10.8~13.2V
(12V ± 10%) |
| Current |
Max. 160mA |
| Operating temperature |
-10°C ～
+40°C |
| Storage temperature |
-30°C ～
+70°C |
| Dimensions |
35.5(W) × 36 (H)
×58 (L) mm |
| Weight |
Approx. 90g |
| Accessories |
DC-plug
(WPDC12), Iris-plug (AIC) |
